Tomcat i875PR S5102-P
Chapter 3: BIOS Setup
Boot Sequence:
Select
［
Press Enter
］
to set
Boot Sequence
Swap Floppy Drive:
This will swap your physical drive letters A & B if you are using two floppy disks.
Enabled / Disabled
Boot Up Floppy Seek:
During Power-On Self-Test (POST), BIOS will determine if the floppy disk drive installed is 40
or 80 tracks.
Enabled / Disabled
Gate A20 Option:
Select if chipset or keyboard controller should control GateA20. When set to Fast, the system
chipset controls Gate A20. When set to Normal, a pin in the keyboard controller controls Gate
A20. Setting Gate A20 to Fast improves system speed, particularly with OS/2 and Windows.
Normal / Fast
Boot Up NumLock Status:
Sets the Num Lock on or off.
On
/
Off
Typematic Rate Setting:
Toggles control of keyboard key repeat rate.
Enabled/Disable
Typematic Rate (Chars/Sec):
Defines how many characters are repeated per second when holding down a key on the
keyboard.
6 / 8 / 10 / 12 / 15 / 20 / 24 / 30
Typematic Delay (Msec):
Defines the delay that occurs at keystroke before that key will start to repeat.
250 / 500 / 750/ 1000
Security Option:
Sets the password on either just the BIOS setup or the entire system (BIOS setup included).
Setup / System
OS Select For DRAM > 64MB:
Select OS2 only if you are running OS/2 operating system with more than 64MB of RAM.
Non-OS2
/
OS2
HDD S.M.A.R.T. Capability:
Select Monitoring and Reporting technology.
Enabled / Disabled
Console Redirection:
Select
［
Press Enter
］
to set
Console Redirection
Report No FDD For WIN 95:
Select enable to detect if there is FDD for WIN95 exist.
No
/
Yes
3-6
http://www.tyan.com
