Tomcat i875PR S5102-P
Chapter 5: Diagnostics
Chapter 5: Diagnostics
Note: if you experience problems with setting up your system, always check the following
things in the following order:
Memory, Video, CPU
By checking these items, you will most likely find out what the problem might have been when
setting up your system. For more information on troubleshooting, check the TYAN website at:
http://www.tyan.com
.
5.1 – Beep Codes
Fatal errors, which halt the boot process, are communicated through a series of audible beeps.
For example, if the BIOS POST can initialize the video but an error occurs, an error message
will be displayed. If it cannot display the message, it will report the error as a series of beeps.
The most common type of error is a memory error.
Before contacting your vendor or TYAN Technical Support, be sure that you note as much as
you can about the beep code length and order that you experience. Also, be ready with
information regarding add-in cards, drives and O/S to speed the support process and come to
a quicker solution.
5.2 – Flash Utility
Every BIOS file is unique for the motherboard it was designed for. For Flash Utilities, BIOS
downloads, and information on how to properly use the Flash Utility with your motherboard,
please check the TYAN web site:
http://www.tyan.com/
Note:
Please be aware that by flashing your BIOS, you agree that in the event of a BIOS flash
failure, you must contact your dealer for a replacement BIOS. There are no exceptions. TYAN
does not have a policy for replacing BIOS chips directly with end users. In no event will TYAN
be held responsible for damages done by the end user.
5-1
http://www.tyan.com
