TYAN S1857 Manual Download Page 1

Page: 1 / 117

Tyan S1857

Trinity 371

Motherboard Users Manual

Revision 1.20

manual may be reproduced or translated without prior written consent from Tyan

Computer Corp.

All registered and unregistered trademarks and company names contained in this

manual are propery of their respective companies including, but not limited to the

following.

AMIBIOS is a trademark of American Megatrend Incorporated.

Award is a trademark of Phoenix Technologies Ltd.

Windows is a trademark of Microsoft Corporation.

IBM, PC, AT, PS/2 are trademarks of IBM Corporation.

INTEL, Pentium II, Celeron are trademarks of Intel Corporation.

S1857 Trinity 371 are trademarks of TYAN Computer Corporation.

Information contained in this publication has been carefully checked for accuracy and

reliability. In no event will Tyan Computer be held liable for any direct or indirect,

incidental or consequential damage, loss of use, loss of data, or other malady resulting

from errors or inaccuracies of information contained in this manual. The information

contained in this document is subject to change without notice.

PRINTED IN TAIWAN

Summary of Contents for S1857






















































































































Search results

Summary of Contents for S1857

Reviews:

Related manuals for S1857

Brands by name

Popular brands

TYAN S1857, Manual

Search results

Summary of Contents for S1857

Reviews:

Related manuals for S1857

Brands by name

Popular brands