TYAN S2927, Manual

Page: 38 / 88

http://www.tyan.com
38
3.3 Setup Basics
The table below shows how to navigate in the setup program using the
keyboard.
Key Function
<F1> General help window
<ESC> Exit current menu
ß à
arrow keys Select a different menu
↑
or
↓
arrow keys
Move cursor up/down
<Tab> or <Shift-Tab> Cycle cursor up/down
<Home> or <End> Move cursor to top/bottom of the window
<PgUp> or <PgDn> Move cursor to next/previous page
<-> Select the previous value/setting of the field
<+> Select the next value/setting of the field
<F8> Load Fail Safe default configuration values of the menu
<F9> Load the Optimal default configuration values of the
menu
<F10> Save and exit
<Enter> Execute command or select submenu
3.4 Getting Help
Pressing [ F1 ] will display a small help window that describes the appropriate
keys to use and the possible selections for the highlighted item. To exit the Help
Window, press [
ESC ].
3.5 In Case of Problems
If you have trouble booting your computer after making and saving the changes
with the BIOS setup program, you can restart the computer by holding the
power button down until the computer shuts off (usually within 4 seconds);
resetting by pressing CTRL-ALT-DEL; or clearing the CMOS.
The best advice is to only alter settings that you thoroughly understand. In
particular, do not change settings in the Chipset section unless you are
absolutely sure of what you are doing. The Chipset defaults have been carefully
chosen either by TYAN or your system manufacturer for best performance and
reliability. Even a seemingly small change to the Chipset setup options may
cause the system to become unstable or unusable.
NOTE
: The following pages provide the details of BIOS menu. Please be
noticed that the BIOS menu are continually changing due to the BIOS
updating. The BIOS menu provided are the most updated when this
manual is written. Please visit Tyan’s website at
http://www.tyan.com for
the information of BIOS updating.