TYAN S2927 Manual Download Page 1 | Manualshive

Page: 1 / 88

background image

http://www.tyan.com

1

Thunder n3600B

///

S2927

Version 1.0

Copyright

Copyright © TYAN Computer Corporation, 2006. All rights reserved. No part of
this manual may be reproduced or translated without prior written consent from
TYAN Computer Corp.

Trademark

All registered and unregistered trademarks and company names contained in
this manual are property of their respective owners including, but not limited to
the following.

TYAN, Thunder n3600B are trademarks of TYAN Computer Corporation.
AMD, Opteron, and combinations thereof are trademarks of AMD Corporation.
AMI, AMI BIOS are trademarks of AMI Technologies.
Microsoft, Windows are trademarks of Microsoft Corporation.
SuSE,is a trademark of SuSE AG.
Marvell

®

is a trademark of Broadcom Corporation and/or its subsidiaries

XGI and XG20 are trademarks of XGI Corporation
nVIDIA, nForce are trademarks of NVIDIA Corporation.

Notice

Information contained in this document is furnished by TYAN Computer
Corporation and has been reviewed for accuracy and reliability prior to printing.
TYAN assumes no liability whatsoever, and disclaims any express or implied
warranty, relating to sale and/or use of TYAN products including liability or
warranties relating to fitness for a particular purpose or merchantability. TYAN
retains the right to make changes to product descriptions and/or specifications
at any time, without notice. In no event will TYAN be held liable for any direct or
indirect, incidental or consequential damage, loss of use, loss of data or other
malady resulting from errors or inaccuracies of information contained in this
document.

1
2
3
...
»

Summary of Contents for S2927

























































































Reviews:

No comments

Related manuals for S2927

RTKA223012DR0050BU

Brand: Renesas Pages: 14

Brand: ECS Pages: 72

Brand: Biostar Pages: 72

Brand: Gigabyte Pages: 44

DS-5116HFI Series

Brand: HIKVISION Pages: 22

SERVER SYSTEM SR2500AL

Brand: Intel Pages: 210

Brand: ASROCK Pages: 26

Brand: Texas Instruments Pages: 23

Brand: IEI Technology Pages: 165

Brand: MiTAC Pages: 132

Brand: Dynatem Pages: 57

Brand: Intel Pages: 36

LMQ61460EVM-400K

Brand: Texas Instruments Pages: 20

Brand: DFI Pages: 138

Brand: DFI Pages: 92

Brand: Acorp Pages: 80

RouterBOARD 200 Series

Brand: MikroTik Pages: 19

Brand: Samsung Pages: 121

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands