Tiger 200T S2505T
41
3.7 PnP/PCI Configuration
This section describes the PCI/PnP configuration options available.
3.8 PC Health Status*
This section describes the hardware monitoring of certain onboard devices. No options are user-defined.
Reset Configuration Data
PNP OS Installed
Sets whether the system is using a Plug-n-Play OS. [Default set-
ting is
NO
]
Resources Controlled By
(ESCD)
Sets whether the configuration data in the ESCD should be
reset at bootup. [Default setting is
Disabled
]
Sets how the PnP devices will be controlled. [Default is
Auto(ESCD)
]
IRQ Resources
Sets IRQs PnP control statuses.
DMA Resources
Sets DMAs PnP control statuses.
Assign IRQ for VGA
PCI/VGA Palette Snoop
Reserved. [Default setting is
Disabled
]
Sets whether an IRQ should be reserved for VGA. [Default set-
ting is
Enabled
]
Assign IRQ for USB
Sets whether an IRQ should be reserved for USB. [Default set-
ting is
Enabled
]
Current CPU2 Temp.
Current CPU1 Temp.
Displays temperature of CPU1 in Celsisus and Farenheit.
Current CPUFAN1 Speed
Displays temperature of CPU2 in Celsisus and Farenheit.
Displays speed of CPUFAN1 in revolutions per minute (RPM).
Current CPUFAN2 Speed
Displays speed of CPUFAN2 in revolutions per minute (RPM).
CPU1 Vcore
CPU2 Vcore
Displays core voltage of CPU1.
Displays core voltage of CPU2.
Displays power supply voltage on 3.3V line.
Displays power supply voltage on 12V line.
3.3V
12V
Displays power supply voltage on 5V line.
5V
