Tiger 200T S2505T
39
3.6 Power Management Setup
This section describes the different power management functions that may be available on your system.
Please note that power management functions are also dependent on your OS’ power management func-
tions, and that both OS and system power management functions should be set up to work in conjunction
with one another.
(continued on next page)
Power Management (subscreen)
ACPI Function
Enable or Disable Advanced Configuration Power Interface.
[Default setting is
Enabled
]
Power Management
Lets you enter the screen for configuring power states.
Sets whether each mode should be set separately. [Default is
User Define
]
HDD Power Down
Sets time that system should wait before powering down the
HDD(s). [Default is
Disable
]
Doze Mode
Suspend Mode
Sets time that system should wait before CPU clock runs at
slower speed to save power. [Default is
Disabled
]
Sets time that system should wait before suspending all devices
except for CPU, to save power. [Default is
Disabled
]
Sets type of suspend function to enable once the system enters
suspend mode. [Default is
S1(POS)
]
Sets power-saving mode for video display. [Default is
Suspend-
>Off
]
ACPI Suspend Type
Video Off Option
Reserved. [Default is
Yes
]
PM Control by APM
Determines manner in which the monitor is blanked. [Default is
V/H SYNC+Blank
]
Video Off Method
If Modem Ring Resume is Enabled, it’s possible to wake the
system up by dialing into it. [Default is
3
]
Modem Use IRQ
Wake Up Events (subscreen)
Soft-Off by PWRBTN
Sets time needed to hold down the power button to shutdown
the system. [Default setting is
Instant-Off
]
CPU Fan in Syspend
Lets you enter the screen for configuring wake up events.
Sets state of the CPU Fan when Suspend mode occurs. [Default
is
Off
]
State after power failure
Sets system state after a power failure occurs. [Default is
Auto
]
