http://www.tyan.com
42
3.9 Frequency/Voltage Control
This section describes the processor configuration options available.
Tyan takes no responsibility and
will not be held liable for damage related to misuse of these settings.
3.10 Set Supervisor Password / Set User Password
Both of these functions allow for passwords to be set accordingly for BIOS configuration.
When selecting one of the password functions, the following words will appear:
ENTER PASSWORD:
After typing in a new password of up to eight characters, press
[Enter]
. The following words will then
appear:
CONFIRM PASSWORD:
Type your new password again, and the password will then be set. Please note that entering a new pass-
word and then confirming it, will clear any old password that you had (depending on type of password).
3.11 Exit BIOS Setup
You have the ability to perform the following options, either during setup or upon leaving setup.
Load Failsafe Defaults:
loads the minimal settings for all devices for maximum safety
Load Optimal Defaults:
loads the maximum settings for all devices
Save & Exit Setup:
saves all changes, exits and reboots system
Exit Without Saving:
discards all changes, exits and reboots system
* optional feature available on some Tiger 200T models
Auto Detect DIMM/PCI CLK
Auto Detect the DIMM and PCI clock settings.
[Default setting is
Enabled
]
