C
OMPONENTS AND
I
NDICATORS
2-2
F
RONT
P
ANEL
This section describes the components found on the font panel.
Figure 2-2: Front Panel Components
Table 2-2: Front Components and Indicators
Item
Component
Description
1
Modifier LEDs Indicates use of the SHIFT, CTRL, 2ND ALT and CAPS modifier keys
2
Battery LED
Lights red to indicate a low battery or green a charging battery
3
On/Off Switch Controls the Power, Suspend and Resume operations
I
NTERFACE
C
ONNECTIONS
This section describes the interface connectors found on the bottom of the JETT.
Note: You can find Information regarding USB cables and connections in the JETT•XL USB supplement
JETT•
CONNECT
S
YSTEM
The JETT•connect system is a set of rugged interface and cable connectors especially designed for industrial
environments. It features positive connector retention without any hardware restraints for quick
connect/disconnect operations and a contact design that prevents failure due to pin fatigue and cable stress
after repeated use.
Figure 2-3: JETT•connect Interface Connector
1
2
3
4
5
6
7
8 1012
9 11
Viewed facing connector
RS-232 Interface Pin-Outs with 11-18VDC Input
RS-232 Interface Pin-Outs with 5VDC Output
Pin 1 = X1
Pin 7 = DSR
Pin 1 = Tied to Pin 10
Pin 7 = DSR
Pin 2 = Ground
Pin 8 = RTS
Pin 2 = Tied to Pin 11
Pin 8 = RTS
Pin 3 = RI
Pin 9 = DCD
Pin 3 = RI
Pin 9 = DCD
Pin 4 = CTS
Pin 10 = 11-18VDC Input
Pin 4 = CTS
Pin 10 = 5VDC 10%
Pin 5 = DTR
Pin 11 = Shield
Pin 5 = DTR
Pin 11 = Ground
Pin 6 = TXD
Pin 12 = RXD
Pin 6 = TXD
Pin 12 = RXD
Note: Unless specified at time of order, the standard configuration for Pin 10 of the JETT•connect is 11-18VDC
Input
2
1
3
1
Summary of Contents for JETT XL
