Two Technologies JETT XL, User Manual

Page: 18 / 58

C
OMPONENTS AND
I
NDICATORS
2-4
P
OWER
J
ACK
The optional power jack found on the bottom of the JETT enables you to connect an 11-18 VDC Input power
supply battery charger, such as Two Technologies #14508. Use of other power supplies unless approved by
Two Technologies may cause damage to the unit and void the warranty.
Figure 2-6: Power Jack
Viewed facing connector
C
OMPACT
F
LASH
S
LOT
C
OVER
The standard compact flash slot cover located on the top of the unit provides access to the compact flash slot
that stores memory and device cards. In addition to the standard cover, a modified cover which has a
machined opening that allows you to easily insert and remove devices cards that exceed 1.437 inches in
height, is also available.
Two phillips-head (2-56 x 5/16”) secure the cover to the top of the JETT. To insert device or
memory cards into the compact flash slot, you must first remove these screws using a phillips # 0 non-
magnetic tip screwdriver, which you can purchase from Two Technologies (Part Number 14673). You can
also purchase additional screws from Two Technologies (Part Number 12624).
For information about inserting and removing memory and device cards, see Using the Compact Flash Slot .
Figure 2-7: Standard Compact Flash Slot Cover, Closed
Figure 2-8: Standard Compact Flash Slot Cover, Opened
Figure 2-9: Modified Compact Flash Slot Cover for Long Device Cards