Two Technologies JETT XL, User Manual, Page: 24 / 58

O
PERATION
3-4
R
EPLACING
B
ATTERIES
/B
ATTERY
P
ACK
CAUTION! There is a risk of explosion if you replace the NiMH battery with an incorrect type. Only use a NiMH
battery supplied with your unit or a replacement NiMH battery supplied, recommended, or approved by Two
Technologies, Inc.
When using alkaline batteries, replace all alkaline batteries in the JETT at the same time. Do not mix old and
new batteries, mix different types or brands of batteries, or dispose of the batteries in a fire. These actions
can cause battery rupture or leakage that result in personal injury or property damage.
Remove the batteries from the JETT when not using the JETT for extended periods. Store the batteries in a
cool, dry location at normal room temperature.
To replace the rechargeable battery pack or change AA batteries:
1.
Turn the power off. With the unit face down, pull the battery cover retaining clip up from its
recessed slot and turn the clip in a counter clockwise motion (see Figure 3-5).
2.
Lift the cover up and remove the batteries/battery pack.
3.
If the unit contains a NIMH battery pack, use the tab to lift up on the battery pack and then out.
4.
Close the battery cover and turn the battery cover retaining clip clockwise to lock the cover.
Figure 3-4: Changing Batteries
TOP
PLEASE RECYCLE
BOTTOM
CAUTION:
RISK OF EXPLOSION IF BATTERY
IS REPLACED BY AN INCORRECT
TYPE. DISPOSE OF USED BATTERIES
ACCORDING TO THE INSTRUCTIONS.
Battery Pack Cover
(opened)
NiMH
Battery Pack
Tab
Akaline Batteries
Battery Pack Cover
(closed)
Retaining Clip