34
1
S
I
4. After obtaining the necessary free play, inspect
for the clearance between the bullet (3) and slot
end (4) marked as “S” as shown in the figure.
5. If any clearance is found, turn the adjuster nut
(2) at the bottom side in the slot marked as “S”
in clockwise direction until there is no clearance
between the bullet bottom (3) and the slot
bottom (4).
1
2
S
I
6
Clearance
Clearance
5
1
S
I
Clearance
Clearance
3 4
2
6. After adjusting the adjuster nut bottom, If any
clearance is observed in between the bullet top
(5) and the slot top (6) marked as “I” as shown,
then turn the adjuster nut (2) in anti-clockwise
until there is no clearance.
7. Once again check and confirm the brake play at
the lever end.
