28
SELF - MAINTENANCE PROCEDURES
Battery is located at the front end near seat hinge
below the seat assembly. The electrolyte level of the
battery must be maintained to avoid damages to the
battery. Follow the procedure to check the electrolyte
level:
1. Open the seat assembly as explained in page
no. 13 and take out the utility box.
2. Inspect battery electrolyte level. It should be
between minimum and maximum level.
3. If the electrolyte level is below minimum level,
add only distilled water upto the maximum level
by removing the filler caps.
4. Reinstall the filler caps and clean the battery
thoroughly, apply petroleum jelly to the battery
terminals to protect it from corrosion.
Incase of any abnormality or for removal of battery
from the vehicle, contact TVS Motor Company
Authorised Main Dealer / Authorised Dealer.
Once the battery is charged initially, never add diluted
sulphuric acid. Use only distilled water for topping up.
Never add tap water.
Never check the battery charge by shorting the terminals.
Always connect the positive terminal first and then
negative to avoid sparking.
Do not obstruct, bend or change the routing of battery
air vent tube. Make sure that the vent tube is firmly
attached to the battery and the other end is open and
clear.
Caution
Maximum
Maximum
Minimum
Minimum
