30
Load fuse
1. Open the front panel.
2. Fuse case fitted on the frame contains a 10A
fuse. Pull out the fuse case from frame bracket.
Open the fuse case and take out the fuse.
3. Inspect the fuse for failure. If found defective,
replace the fuse with the extra fuse provided in
the wiring harness itself.
4. Close the fuse case and re-fix into the frame
bracket.
Do not use vehicle by
shorting the wires without
fuse.
This may result in overheating of electrical items
/ wiring and may result in fire. Do not use fuse of higher
amperage than specified for the safety of electrical
system.
Caution
Good Fuse
Blown Fuse
5. Turn ‘ON’ the ignition lock and check for proper
functioning of electrical systems. Incase the
fuse fails again, consult the nearest TVS Motor
Company Authorised Main Dealer / Authorised
Dealer.
