37
37
Brake shoe wear indicator - Rear
When brake is applied, the wear limit indication
pointer (1) on the rear brake cam lever should be
within the wear limit indicator (2) on the crankcase
LH.
In case the wear limit indication pointer (1) is going
beyond wear limit indicator (2), index the lever to next
slot with the help of Dealers to extend shoe life.
TYRES
Tyre pressure
Check the tyre pressure atleast once in a week if not
more frequently. Insufficient air pressure in the tyres
not only hasten the tyre wear, but also seriously
affects the stability of the vehicle.
Under inflated tyres make smooth cornering difficult
and over inflated tyres decreases the tyre contact
with the ground which can lead to skidding and loss
of control.
Be sure that the tyre pressure is within the specified
limit at all times.
Tyre pressure in cold condition:
Solo Dual
Front 1.70 kg/cm² (24 PSI)
1.70 kg/cm² (24 PSI)
Rear 2.00 kg/cm² (29 PSI) 2.25 kg/cm² (32 PSI)
Replace the brake shoes as a set, if the wear limit
indicator shows beyond the wear limit even after
indexing the lever.
Caution
1
2
The tyre inflation pressure in cold condition and the
tyre tread condition are extremely important for the
performance and safety of the rider. Check the tyres
frequently for inflation pressure as well as the wear
pattern on it. Use of a tyre other than the standard may
cause instability.
Warning
