29
29
FUSE REPLACEMENT
Non-working of electrical systems may be due to
safety fuse failure. Short circuit or overload in the
electrical system are the main cause for fuse failure.
Two different fuses are provided in TVS Scooty Pep+
they are:
•
Main fuse - 15A
•
Load fuse - 10A
The main fuse is located near the battery and the load
fuse is located at the front of vehicle inside the front
panel.
Follow the procedure given below to inspect and
replace the fuse:
Main fuse
1. Open the seat assembly as explained in page
no. 13 and take out the utility box.
2. Fuse case fitted on the near battery contains
a 15A fuse. Pull out the fuse case from frame
bracket. Open the fuse case and take out the
fuse.
3. Inspect the fuse for failure. If found defective,
replace the fuse with the extra fuse provided in
the wiring harness itself.
4. Close the fuse case and re-fix into the battery
band.
5. Turn ‘ON’ the ignition lock and check for proper
functioning of electrical systems. Incase the
fuse fails again, consult the nearest TVS Motor
Company Authorised Main Dealer / Authorised
Dealer.
