10
6. High beam indicator lamp
Glows either when the head lamp high beam or the
pass-by is activated.
7. Malfunction indicator lamp - MIL ( )
MIL is turned ON when the ECU detects a fault in
the system.
If the malfunction indicator lamp ‘ ‘ is
glowing continually when the engine is started,
immediately contact the nearest TVS Motor
Company Authorised Main Dealer or Authorised
Dealer.
Caution
When the fuel indication needle comes to E mark,
fill fuel in the tank immediately to avoid engine
switch OFF / damage to fuel pump which leads to
replacement of pump without warranty.
LED DAY TIME RUNNING LAMP (DRL)
TVS Scooty Pep+ comes with a day time running LED
lamp which glows automatically once the ignition is
turned ON and continue to glow till the head lamp is
switched ‘ON’.
DRL lamp goes ‘OFF’ automatically once the head lamp
is turned ‘ON’.
Note
The malfunction indicator will continue to remain
switched ON after ignition key ON until engine is
started. But after starting the engine it will switch off if
no malfunction is detected .
Note
