5.0 OPERATING THE UNIT
The SDI to Analog converter is controlled via four buttons and status is indicated
on the front panel LCD.
•
▲
and
▼
Buttons:
These buttons allow navigation within the Menu and
adjustment of the operational parameters.
•
Enter Button:
Allows entering the secondary menus or confirms menu item
selection.
•
ESC Button:
ESC
apes from the current selection, going up one menu level,
Without any changes to the previous setting.
5.1 Status
As soon as the unit is plugged in (and after initialization and recalling of the
values and settings stored in the non-volatile memory), the SD-210AD LCD
shows
TVOne SD-210AD
on the first line and Input Signal Status on the second
line:
INPUT ABSENT
or
INPUT Std,
where ‘Std’ is the signal type present at the
selected input, if there is video present.
When status is displayed, depressing the
Enter
button sets the gain settings to
unity as the default condition, sets image sharpness to flat (factory calibration)
plus updates the non-volatile memory with these values.
If you depress
ESC
, the LCD display shows Selected Input Format, Levels and
Gain Status on the display’s second line. (For example, it may show:
YUV
SMPTE CAL
, indicating component output is YUV with SMPTE levels plus all
level controls [Luma, Chroma and Set Up] are at unity gain.)
Alternatively, it could show
YUV BCAM UNCAL,
(if Component Output with
Betacam® Levels has been selected), provided one or more of the level controls
has been set to a value other than unity.
Another possibility is
RGB CAL
, if RGB output has been selected.
7
Summary of Contents for SD-210AD
Page 1: ...Instruction Manual SD 210AD Analog to SDI Converter...
Page 2: ...2...
