TV One SD-210AD, Instruction Manual

Page: 10 / 16

5.2.5 Input Standard
When this option is selected, the LCD’s first line shows: Sel Input Std , and the
second line will show the current standard.
The ▲ and ▼ buttons allows selection of PAL, PALN, NTSC, NTSCJ (NTSC
without pedestal), PAL M and SECAM.
Input Standard changes takes effect after pressing Enter , which stores the
selection in the non-volatile memory. Confirmation of the change is shown on the
LCD’s second line via the text
*OK after the new standard selection has been
stored. To return to the Main Menu , press the ESC button.
(Note: The output standard is not modified until
Enter is depressed, a difference
from the way the level controls work. ESC takes you back to the Main Menu
without any change to the selected standard).
5.2.6 Input Filter
The SD-210AD allows the user to choose which kind filter topology is to be used
for luma/chroma separation.
When selecting this option, if the input format chosen is Composite, the first line
of the LCD shows
Select Filter and the second line on the display shows the
current option.
The arrow buttons, ▲ and ▼ , allows selection of either Adaptive Comb or Low
Pass filters. (This Low Pass filter is the one selected through the Filter Select
option (section 5.2.8.3) under Advance Settings (section 5.2.8) menu.)
When selecting any of the other input formats, the LCD display will show
Not
Applicable and, after a few seconds, the unit will revert to the Main Menu
(Note: The input filter selection is not accepted until
Enter is depressed, as was
the case with the Input Standard functionality described in section 5.2.5. ESC
takes you back to the Main Menu without any change to the selected input).
5.2.7 Input Format
The SD-210AD allows the user to choose which input signals are processed by
the decoder and sent to the digital encoding circuitry for generation of the
SPMTE 259M SDI output signal.
When this option is selected, the first LCD line will show Input Format and the
second the format currently in use.
10