TV One SD-210AD, Instruction Manual

Page: 11 / 16

The arrow buttons, ▲ and ▼ , allow selection of one of the following options:
Composite
Y/C
YUV SMPTE/EBU
YUV BETACAM
The
Enter and ESC buttons behave the same way as the functionality described
in 5.2.5 and 5.2.6.
5.2.8 Advance Settings
This menu gives the experienced user the possibility of adjusting parameters to
compensate for unexpected anomalies.
We strongly recommend the non experienced or novice user leave these settings
in their factory default value, which in most of the cases are well above the
minimum requirements for normal situations.
Misuse of these settings may result in an undesirable picture.
5.2.8.1 Luma AGC
Through this option the luminance AGC input circuitry can be
Enabled or
Disabled .
When enabled, gain is referenced to the sync level; when disabled it is fixed.
▲ , ▼ , ESC and Enter behave the same way as in the level control sub menus.
5.2.8.2 Chroma AGC
Similarly, this option allows operation of the chrominance AGC.
When enabled, gain is referenced to the color burst; when disabled it is fixed.
5.2.8.3 Filter Select
This option allows choosing among different options of luminance low pass filters
and is only available when the input signal format is Composite Video.
To be able to enter filter selection, the unit has to be set for Low Pass Filter
operation (section 5.2.6).
Different filters are numbered starting at 1 (corresponding to the lowest cut off
frequency) to the highest number which corresponds to the highest cut off
11