TV One SD-210AD, Instruction Manual

Page: 8 / 16

5.2 Main Menu
Depressing the arrow buttons ( ▲ or ▼ ), when status is being displayed, allows
navigation through the Main Menu. The options are:
Luma Level
Chroma Level
Set Up Level
Sharpness Adj.
Input Standard
Input Filter
Input Format
Adv. Settings
Press Enter to select the desired option or press ESC to go back to the Status
display.
Note: All settings (e.g. Luma, Chroma and Set Up levels, all Advanced Settings,
etc) are stored in non volatile memory for each standard and retrieved when the
standard is selected.
5.2.1 Luminance Level
When this option is selected, the LCD’s first line shows Adjust Luma and the
second line will indicate Gain = X.XX , (where X.XX is the current gain level
factor).
▲ or ▼ increases or decreases the Luma level.
Output luminance changes in step with the displayed value. Pressing
Enter
saves this value to the non-volatile memory and returns you to the Main Menu .
Pressing the ESC button will cycle you back to the Main Menu without saving
the adjustment. (To amplify on this point a bit, even though you didn’t save the
new value, pressing the
ESC button does not return the unit to the value that
was present before the change was made. The change you made is still present
until you remove power from the unit. When you next apply power, the last saved
value will appear. If you want the new value you just created to appear the next
time you apply power, you have to save it first as explained above).
Steps are 0.05 (5 %) each, with a maximum level of 2.00 (100 % increase) and a
minimum level of 0.00 (no luminance output).
8