TV One SD-210AD, Instruction Manual

Page: 12 / 16

frequency available. Quantity of options depends on the input standard selected
(section 5.2.5).
When entering the menu current filter number appears and with the arrow
buttons,
▲ and ▼ , you can go down until Filter 1 and up to the maximum.
Note: A preview of the filter action is shown when scrolling through the menu.
Pressing Enter confirms the selection and stores it in non volatile memory while
pressing ESC accepts the last filter setting viewed as a selection but doesn’t
store it in memory.
5.2.8.4 U/V Gain/Offset
Through this option, U or (B-Y) and V or (R-Y) gains and offsets can be
independently adjusted giving the user the possibility of doing some kind of color
correction to the input video.
Again, by means of the arrow buttons and Enter, the user can choose among the
following options:
5.2.8.4.1 U (B-Y) Gain
This option allows the gain of the U or (B-Y) component of the chroma signal to
be varied.
Shown values are relative: 0 means no change, positive values, increase and
negative decrease the base overall chroma gain level.
▲ , ▼ , ESC and Enter behave the same way as in the level control sub menus.
5.2.8.4.2 U (B-Y) Offset
By means of this option, the offset of the U component for no chroma (center
position in a vectorscope) can be varied.
Again, this value is relative to the zero value.
Operation is similar to the Gain explained above.
5.2.8.4.3 V (R-Y) Gain
As for U Gain, this sub menu allows altering the value of the V or (R-Y)
component of the chroma signal.
Operation is analog.
12