Replacing the foam TV Ears Tips with new foam TV Ears Tips:
Note: Depending on usage, TV Ears Tips will become dirty and frayed. Replace TV Ears Tips
if they are soiled or show signs of wear. Do not re-attach or reuse ear tips after they have
become detached. For safety purposes, we recommend replacing TV Ears Tips every 30-60
days.
1. Use the top portion of the TV Ears Tips package to remove the ear tip from the
headset. Place the ear tip into the triangular cutout of the package.
2. Slide the ear tip to a corner and gently pull the ear tip off. The black snap tip
adapter should remain on the headset. If a white o-ring remains on the tip of the
snap tip adapter, remove it before attempting to install a new ear tip.
3. Open the package of ear tips and place it on a level surface.
4. Place the pointed end of the snap tip adapter into the center hole of the new ear
tip and push down until you feel the new ear tip snap on the snap tip adapter.
5. Gently pull the headset away from the tray. The ear tips should now be installed.
Replacing the foam TV Ear Tips with the Rubber Ear Tips:
Note: Depending on usage, rubber ear tips will become discolored and dirty with use. For
cleanliness wash the rubber ear tips with mild soap and warm water every 30 days. We
recommend replacing rubber ear tips every 6 months or as needed.
1. If you have the foam TV Ears Tips installed on your headset and are replacing them
with the rubber ear tips, remove the black snap tips adapters. To remove the snap
tip adapters, you will need something with a flat edge such as a butter knife or a
spoon.
2. Place your flat object in the gap between the snap tip adapter and the headset.
Gently force the snap tip adapter off the headset.
3. Once the foam ear tips and snap tip adapters are removed from the headset, place
each rubber ear tip directly onto the tip of the headset where the snap tip adapter
was initially located. The ear tip shoudl now be installed.
Replacing the Rubber Ear Tips with foam TV Ears Tips:
Heed all above warnings and notes about foam TV Ears Tips and Rubber Ear Tips.
1. If you are already using rubber ear tips, remove them prior to installing the foam TV Ears Tips. They will easily
pull off the headset.
2. Install the snap tip adapters by gently twisting them onto the ends of the headset.
3. Open the package of ear tips and place it on a level surface.
4. Place the pointed end of the snap tip adapter into the center hole of the new ear tip and push down until you
feel the new ear tip snap on the snap tip adapter (see diagram above).
5. Gently pull the headset away from the tray. The ear tip should now be installed.
Using the Voice Cord:
The voice cord can be used to amplify voices and sounds in noisy environments. Hold the microphone up to someone
to hear them more clearly or set it in front of the person you are having a conversation with at a loud restaurant.
Note: The battery pack should come with 1 ‘AA’ battery pre-installed.
1. Insert the power microphone plug into the jack on the top of the voice cord battery pack.
2. Insert the plug of the voice cord into the “Accessory” jack of the Professional headset.
Optional: Velcro the power microphone to the voice cord battery pack by removing the thin protective
covering and placing the sticky side on the pack.
Add length to the microphone by plugging the power microphone into the female end of the extender cord.
Then plug the male end of the extender cord into the jack on the top of the voice cord battery pack.
Maintenance
Replacing Ear Tips:
Your headset comes with foam TV Ears Tips attached. We also offer Rubber Ear Tips. The foam ear tips must be used
with black snap tip adapters; the rubber ear tips do not use snap tip adapters. Ear tips can be purchased from your
local TV Ears customer service.
3
Page 7
