Page 72
Disabling the START CYCLE BY CLOCK
2.
On the Start Cycle by Clock screen, move the cursor to Disabled.
Press Up or Down key to disable Starting cycle by clock.
3.
Exit the Enabling the Start Cycle by Clock.
11.3.3 Set date and time
This subdirectory enables the operator to set date and time.
On the Set date and time screen, the time is displayed in the upper
row in the form "HH:MM:SS". The hour range is 24 hour (i.e. from "0"
to "24"). The date is displayed in the lower row in the form "DD: MMM:
YYYY".
1.
Set time and date
2.
Exit the Set date and time screen. The following screen will appear:
