Tuttnauer AMS10-120-T Operation And Maintenance Manual Download Page 87

Page: 87 / 104

11.3

Installation for the first time

Unpacking the printer:

1. Carefully open the printer box (1) and remove the printer packing.

2. Place the printer (2) on the table, and remove the two tapes (3).

3. Remove

the

rest of the

box

content which

includes

USB

communication cable (6), electrical power cable (7), CD (5), adapter
(8), blue cable (9), and the printer instructions (4).

Note:

the USB communication cable or other cables may come in another

additional box.

11.4

Open the printer top cover

1. Remove the two tapes bonding the printer body to its cover (1) on each

opposite sides of the printer.

2. Pull the two handles left and right (2) simultaneously together forward

as shown by the arrows in figure 1.

Page 80

Summary of Contents for AMS10-120-T








































































































Search results

Summary of Contents for AMS10-120-T

Reviews:

Related manuals for AMS10-120-T

Brands by name

Popular brands

Tuttnauer AMS10-120-T, Operation And Maintenance Manual

Search results

Summary of Contents for AMS10-120-T

Reviews:

Related manuals for AMS10-120-T

Brands by name

Popular brands