Page 52 of 77
3.
Set the required value, move to
Set
and press
UP
or
DOWN
keys to confirm the parameter
value.
4.
In order to exit move the cursor to
Exit
and
press
UP
or
DOWN
keys.
12.11
System Parameters
This directory includes three subdirectories
The following screen will be displayed when entering
SYSTEM
PARAMETERS
directory:
1.
Choose and enter
Print Rate All
(printing rate
during the whole cycle except sterilization
stage).
2.
SET PARAMETER
screen will be displayed
3.
Set the required value, move to
Set
and press
UP
or
DOWN
keys to confirm the parameter
value.
4.
In order to exit move the cursor to
Exit
and
press
UP
or
DOWN
keys.
5.
Repeat steps 1 – 4 for the following
parameters: Print Rate Sterilization (printing
rate during sterilization stage), Screen Saver (0
– 600 minutes, the default is 90 minutes).
12.12
History
This directory includes two subdirectories
The following screen will be displayed when entering
HISTORY
directory:
Summary of Contents for 2840 EL-D
