Page 49 of 77
12.5
Cycle Parameters -- Create Pulse
1.
Choose and enter
Pulse A Count
2.
SET PARAMETER
screen will be displayed
3.
Set the required value, move to
Set
and press
UP
or
DOWN
keys to confirm the parameter value.
4.
In order to exit move the cursor to
Exit
and press
UP
or
DOWN
keys.
5.
Repeat steps 1 – 4 for the following parameters: Pulse A Stay
Time, Pulse A Low Pressure, Pulse A High Pressure, Pulse B
Count, Pulse B Stay Time, Pulse B Low Pressure, Pulse B
High Pressure.
12.6
Cycle Parameters --Heating
1.
Choose and enter
Sterilization
Temperature
2.
SET
PARAMETER
screen will be displayed
3.
Set the required value, move to
Set
and press
UP
or
DOWN
keys to confirm the parameter
value.
Typical display for
Create Pulse
subdirectory
Typical display for
Sterilization Temperature
subdirectory
Summary of Contents for 2840 EL-D
