WWW.TURNSTYLEGATES.COM
Foreign & Domestic Patents Issued & Pending
!
1-800-548-2212
5
Turnstyle Pillar Mount GMS™:
Included with your package:
*
(1) Turnstyle Pillar Mount operator; (2) for dual gate
installation
* (2) Pillar Mount brackets; (4) for dual gate installation
* (2) Gate mounting brackets; (4) for dual gate installation
(if your gate is integrated with the Turnstyle operator,
you do not need gate mounting brackets
* Gate Mounting Hardware
* (1) Turnstyle Installation DVD
For Automatic
GMS™
* (1) Control box with control board and two key chain
remotes
* (1) Rechargeable 12V 7AH Battery, (2) for dual gate
installation
* (1) AC/AC Transformer
* (2) Safety Placards
Other items required:
* Mounting hardware for your pillar mount brackets
(dependent on the material type of your pillar/post)
* Power Drill
* Drill bit (dependent on the material type of your pillar/
post and pillar mounting hardware)
* Hex Bit Socket Set
* Tape measure
* Level
* String level and string (for dual gate installations)
Pre-Installation Considerations
!
Turnstyle Gate Mounting Systems (GMS)
™ are sold in two different mounting configurations,
Pillar Mount
and
Ground
Mount.
The Pillar Mount utilizes an owner provided post or pillar for its support and is attached to the pillar or post by means of
mounting brackets. The Ground Mount operates as a “stand alone” installation in which the Turnstyle operator is set in the
ground. Each system is available in both
Manual
and
Automatic
configurations.
"
If your gate(s) are to be integrated (welded to a Turnstyle Operator,) you or your gate fabricator will need to take
special precautions. The inner tube containing the motor and other heat sensitive components must be removed prior
to and welding. Failure to take these precautions could result in heat damage to the motor and other internal parts of
your operator and render your warranty void. A separate instruction guide regarding welding and powder coating is
provided with operators intended for integration.
Ground Mount
!
Pillar Mount
Tools / Items required for installation:
Turnstyle Ground Mount GMS™:
Included with your package:
*
(1) Turnstyle Ground Mount operator; (2) for dual gate
installation
* (2) Ground Mount brackets; (4) for dual gate installation
* (2) Gate mounting brackets; (4) for dual gate installation
(if your gate is integrated with the Turnstyle operator,
you do not need gate mounting brackets
* Gate Mounting Hardware
* (1) Turnstyle Installation DVD
For Automatic
GMS™
* (1) Control box with control board and two key chain
remotes
* (1) Rechargeable 12V 7AH Battery, (2) for dual gate
installation
* (1) AC/AC Transformer
* (2) Safety Placards
Other items required:
* Shovel or Post Hole digger
* Tape measure
* Concrete mix
* Hex Bit Socket Set
* Level
* String level and string (for dual gate installations)
