Turnstyle Pillar Ground Instruction Manual Download

Page: 2 / 20

WWW.TURNSTYLEGATES.COM

Foreign & Domestic Patents Issued & Pending

1-800-548-2212

Table Of Contents

SAFETY CONSIDERATIONS............................................................3

Installation Safety for Automatic Gates......................3

Operational Safety for Automatic Gates.....................3

II.

INTRODUCTION...............................................................................4

III.

APPLICATIONS.................................................................................4

IV.

PRE-INSTALLATION CONSIDERATIONS.........................................5

Welded/Integrated Gates............................................5

TOOLS / ITEMS NEEDED FOR INSTALLATION................................5

VI.

PRE-INSTALLATION MEASUREMENTS...........................................6

VII. INSTALLATIONS................................................................................7

A. Pillar Mount..................................................................7

B. Ground Mount............................................................10

VIII. BRACKETS......................................................................................12

IX.

ELECTRONICS................................................................................14

Control Panel.............................................................14

Wiring Terminal Functions..........................................15

Wiring Instructions.....................................................16

Adjustments...............................................................16

Auto-Close & Locks...................................................17

OPTIONAL EQUIPMENT INSTALLATION.........................................18

XI.

TROUBLESHOOTING THE OPERATOR AND ACCESSORIES........19

XII. OUR PROMISE TO YOU..................................................................20

XIII. WARRANTY / IDENTIFICATION LABEL...........................................20

www.turnstylegates.com

www.turnstylegates.blogspot.com

Contact our o

ce:

Toll Free:

1-800-548-2212

Direct:

1-843-527-3530

Summary of Contents for Pillar Ground





















Search results

Summary of Contents for Pillar Ground

Reviews:

Related manuals for Pillar Ground

Brands by name

Popular brands

Turnstyle Pillar Ground, Instruction Manual

Search results

Summary of Contents for Pillar Ground

Reviews:

Related manuals for Pillar Ground

Brands by name

Popular brands