Thank you for purchasing Turni
gy
Reaktor. Please read the entire Operating Instructions completely and attentively as it contains
a wide variety of specific programming and safety information.
Input voltage range:
Charge current range:
Discharge current range·
Maximum charge power capacity:
Maximum discharge power capacity:
Maximum extern discharge power ca
p
ac
i
ty·
Current drain for balancing:
Balance accuracy:
Lithium (LiPo/Lilo/LiFe) battery cell count
NiCd/NiMH battery cell count:
Pb
b
attery cell count
Battery setup memories·
Intelligent temperature control·
Weight:
Dimensions (L X W X D):
10--18.0VDC AC 110V or 230V (manual switch)
0.1-12.0A
0.1-5.0A
2x120W (240W)
2x10W (20W)
170W@25V/7A
<500mA
<I0mV
1--6 series (In non
-
bala
n
ce mode, expand LiFe to 8S)
l--17series
l
--1
2
ser
i
e
s (2--24V)
10
Yes
1200g
180x139x60mm
•
High power, high current, high-performance power conversion circuit The charger uses advanced
Synchronous
b uck -boost
DC/DC converter technology with an output conversion efficiency that can reach over 90%. This not only
saves power and reduces heat build up but also makes the charger more compact and conveniently mobile.
•
Two input power
choices:
DC jack with auto-resetting fuse (Maximum
input
current 6A) and butt-welded alligator
clips with 4mm bu
ll
e
t
connectors (25A). The output power can be adjusted to.align with the available input power, thus
preventing input current overload and protecting the DC source.
•
The charger can be used with three types of L
i
thiu
m
batteries-LiPo,
L
i
l
o
,
Li
Fe- and has a fully integrated cell balancer.
•
Internal temperature sensor and temperature controlled automatic cooling FAN.controls the internal temperature and
provides intelligent protection. When the internal
t
em
�era
t
ure is over 60 C ( 140 oF), the output power is automatically
reduced by 25%. If the temperature exceeds 65 C (149 oF) the charge cycle is stopped.
•
Convenient
set
of
IO
battery profile memories that can be
saved
and loaded by number.
•
2Xl6 backlit LCD screen that provides rich infonnation including active mode, current, voltage, total charge(mAh),
charging time and 1empera1ure etc.
•
Various charging/discharging settings and cycles to meet a wide range of customer needs. For Lithium batteries:
b
a
l
a
nc
e charging, normal charging, fast charging, storage, discharging, ext-discharging, charge/discharge cycling, and
battery monitoring. For N
i
Cd
/
N
i
M
H
batteries: charging-auto, charging-manual, discharging,
c
harge/d
i
s
c
ha
r
ge
cycling and forming charge. For Pb batteries: charging and discharging.
•
Unique Lithium battery expanding
di
scha
r
ge program
.
When you connect the external capacity resistance, you can use
it as the maximum
d
i
scharge power capacity-~ l 70W(@2SV /7 A).
•
Unique Lithium battery Monitor program. When you use other equipment to charge or discharge a Lithium pack, you
can use the charger to monitor the per-cell voltages, battery temperature and process time. If any individual cell appears
over-charged or over-discharged or the pack is too hot or the process has gone on for too long, the charger will
generate an alarm sound and the related information will blink.
•
Electric motor test mode can be used
to
run-in electric motors. test motor parameters and performance, check
to
le
ran
c
e
s
etc.
