Charging Lithium battery in BALANCE mode
This funcuon is for balancing the voltage ofL1thium-polymer banery cells while chargmg. In the balance mode the bat1ery
balance lead must be connected
to
the balance port on the right side of the charger. The pinout of the balance port 1s
shown 1n the diagram below. Chargmg in this mode is different from the normal CHARGE mode because the charger can
monitor the voltage of individual cells and adjust the input current fe<l mto each cell to normalize the vohagt"(forexamplc:
Li Po battery within 4.2V)
BALANCE CHG
AUTO
lie
Dec Inc
Ban type Start/Enter
stop
>3 seconds
Balance charging mode of Lithium battery. The left side of the first line set the type of
ba11ery(UP0. Lilo or LiFe). The value on the left side of second line sets the charge
current and on the right side of second line, it shows AUTO. The system will check cell
count automatically by cell balance port' s voltage.
Charge current: 0.05 -IOA, Voltage: I -6 series
Lithium BALANCE charging mode. The screen shows the status during the charging
process. You can stop charging at any time by pressing Batt type/Stop. Press Inc◄ to
display each cell' s voltage(see the balance vo
l
t
ag
e
information) and press
►
Dec
to
display the General Status Information.
Balance port and Individual Cell connection diagram
IO