Error m
r=��)
F
N
�=™l
SHORT ERROR
BREAKCKMN
I NPUT VOLTAGE
LOWVOLTAGE
BALANCE PORT
CELL LOWVOL
BALANCE PORT
CELL HIGHVOL
BATTNCE PORT
NOT CONNECT
faATTERY
CHECK ]
l
LOWVOL TAGE_
�1:�ci�)
fntTE�
O
�
D
)
c�-���1
(CAPAOTY�)
(SAFETY 11��)
The output is connected to a battery with incorrect polarity
This will be displayed when an interruption of the connection between battery and
the charger output has been detected during charging or discharging.
A short-circuit at output. Please check the charging leads
The input voltage is below the limit sci in the USER SET menu.
The input voltage is over the limit(32V)
The voltage of one of the cells in the Lithium battery pack is too low.
Please check the cell voltages one by one
The voltage of one of the cells in the Lithium battery pack is too high.
Please check the cell voltages one by one.
l n Ha lance charge mode, no battery is connected to the charger's balance port.
Without using the balance port, the cell count detected by the charger is less than that
set by the user.
Pl
e
as
e
check the cell count of the battery pack.
Without using the balance port, the cell count detected by the charger is higher than
that set by the user.
Please check the cell count of the battery pack
The internal temperature is over 65 "C (149 F). Cool down the unit.
The external temperature sensor detects (battery) temperature above the limit.
The capacity (mAh) charged or discharged reached the configured protection limit
The charge or discharge time reached the configured protection limit.
23
