Setting
Application example – configuring a safety function in TSC
54
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | [email protected] | www.turck.com
8.6.1
Checking and loading the configuration
The Turck Safety Configurator checks the created configuration for logical errors, which meas,
the logical wiring of the single components in the release circuits is checked. The configuration
check does not consider double allocation etc.
Start the check using the ”Check configuration”-button.
Load the configuration into the device via the commissioning wizard ( [
the
PC
Ò
Monitor
function.
Fig. 45: TSC – sending the configuration
