manualshive.com logo in svg

turck TBEN-S2-4IOL, Instructions For Use Manual, Page: 127 / 134

Share
Download
turck TBEN-S2-4IOL Instructions For Use Manual Download Page 127

V01.00 | 2019/10

127

12

Maintenance

Ensure that the plug connections and cables are always in good condition.
The devices are maintenance-free, clean dry if required.

12.1

Carry out firmware update via FDT/DTM

The firmware of the device can be updated via FDT/DTM. The PACTware™ FDT frame applica-
tion, the DTM for the device and the current firmware are available as downloads free of charge
from 

www.turck.com

.

NOTICE

Interruption of the power supply during the firmware update

Risk of device damage due to faulty firmware update

„

Do not interrupt the power supply during the firmware update.

„

During the firmware update do not reset the power supply.

Example: update the firmware with the PACTware™ FDT frame application

„

Launch PACTware™.

„

Right-click 

Host PC

 

Ò

 

Add device

.

Fig. 67: Adding a Device in PACTware™

Summary of Contents for TBEN-S2-4IOL







































































































































Reviews:

No comments