manualshive.com logo in svg

turck TBEN-S2-4IOL, Instructions For Use Manual, Page: 115 / 134

Share
Download
turck TBEN-S2-4IOL Instructions For Use Manual Download Page 115

V01.00 | 2019/10

115

Diagnostic bit

Meaning

DS_F

Error in the data storage, synchronization not possible
Possible causes:

n

Connected device does not support data storage

n

Overflow of the data storage buffer

Remedy:

„

Connect a device that supports data storage.

„

Clear the data storage buffer.

„

Deactivate the data storage.

TCYC

The device does not support the cycle time parameterized in the master.
Remedy:

„

Increase the cycle time set in the master.

NO_SIO

The device does not support the standard DI (SIO) mode.
Remedy:

„

Select the IO-Link mode for this port.

NO_PD

No process data available The connected device is not ready for operation.
Remedy:

„

Check the configuration.

PDI_E

The connected device reports invalid process data in accordance with IO-
Link specification V1.0.

PDI_H

The connected device reports invalid process data in accordance with IO-
Link specification V1.1.

MD

Missing device, no IO-Link device detected.
Remedy:

n

Check the IO-Link cable.

n

Change the device.

WD

Wrong device detected: one or more parameters of the connected device
(Vendor ID, Device ID, serial number) does not/do not match the data
which are stored in the master for this device.
Remedy:

n

Change the device.

n

Adapt the master parameterization

Device status

Value

Meaning

0

Device works correctly

1

Maintenance event

2

Out-of-specification event

3

Functional check

4

Error

5…255

reserved

Summary of Contents for TBEN-S2-4IOL







































































































































Reviews:

No comments