Turbosol PRO H CL, Instructions For Use And Maintenance Manual

Page: 31 / 54

31
Operations to be carried out MONTHLY or at EVERY
125 HOURS
• Change the engine oil.
• Change the gasoil fi lter.
• Change the engine oil fi lter.
• Check the accumulator: tighten the brackets, check the
level and density of the electrolyte (see instruction on the
engine manual).
The gases emanated by the accumulator are
explosives! Avoid provoking sparks near the battery!
Make sure that the electrolyte does not come in
contact with the skin or the clothes.
• Check the accumulator charge
• Check the seals
• Check the elastic coupling of the agitator shaft
• Check the safety devices on the hopper grill
• Check the setting of the pressure switch and of the air
system max. exhaust valve
• Check the effi ciency of the material pressure gauge
• Check the effi ciency of the emergency stop
• Check and if necessary clean the radiator of the engine
oil (see instructions on the engine manual);
• Check and if necessary clean the hydraulic oil radiator:
the radiating surface of the radiator must be cleaned with
compressed air mixed, if possible, with a non fl ammable
solvent, sprayed through the cooling wings.
Operations to be carried out EVERY 2 MONTHS or at
EVERY 250 HOURS.
• Change the air fi lter.
• Check the tensioning of the alternator belt.
• Check the injectors.
• Check the effi ciency of the safety devices.
• Check the hydraulic system.
Operations to be carried out EVERY 6 MONTHS or at
EVERY 500 HOURS.
• General check of the machine.
• Clean and set the injectors.
• Check the fl exible gasoil and oil pipes.
• Check the effi ciency of the material pressure gauge.
• Check the pipes of the hydraulic system.
• Check the effi ciency of the control panel.
• Change the hydraulic oil fi lter.
Operations to be carried out YEARLY or at 1000
HOURS
• Change the hydraulic oil.