18
• The Access Code
A request for the access code appears on the display as
follows.
The four-digit access code, which is given to the user
when the machine is delivered, must be specifi ed in order
to operate the machine. Once the code has been keyed in
correctly it is valid for a certain time (3 hours) if the machine
is not used.
To insert the code (e.g.: 5678), proceed as follows:
- Insert the fi rst number of the code “5” using the keys
(g3)
and
(g4)
.
Use key
(g4)
to increase the
value of the digit on which the
cursor is positioned.
Use key
(g3)
to decrease the
value of the digit on which the
cursor is positioned.
- Use key
(g1)
to store the number and shift the cursor to
the right onto the next digit.
- Repeat the operation for the other digits.
After the last digit the code is automatically entered and
the machine checks if it is correct.
If the code is incorrect, the procedure must be repeated
from the beginning with a new start.
If the code is correct, proceed with starting the machine.
Starting machines
Fill-up the hopper with water in order to avoid that the
screw turns dry.
Check that the emergency
(34)
button is not on.
• Start the machine by pressing the
ON/OFF (c1)
button
for machine start located on the control panel.
The following indicator lights come on:
- ON/OFF machine start
(c3)
and LOC/REM
(n2)
.
34
b1
b2
n2
c3
c1
g4
g3
g1
0000
Access Code
ProH x.x
[T: 0175]
READY
[–TEST–]
Summary of Contents for PRO H CL
