25
The machine can be fi tted with a
high pressure water
pump
(optional)
.
By using it for washing the machine:
• Connect a water hose
to the machine coupling
(38)
; the water hose must
supply at least 10 l/m.
If you such the water
from a barrel make
sure that:
- the water is clean
- the suction outlet
is at least 50
cm above the
coupling
(38)
- prime the pump
previously.
• Connect the lance with its
delivery hose to the coupling
(39)
.
The lance can be used in short or long
version. It is supplied with a normal straight
nozzle and with a Turbo nozzle (the latter is very
useful to clean surfaces).
•
Start the pump
(i1)
by pressing the
ON
button at the control panel.
You will read a pressure of 100 bar on
the pressure gauge
(40)
.
•
Clean the machine as instructed.
Do not ever point the water jet at people.
Use suitable protections, especially for hands and
eyes. Do not ever point the water jet at electrical
components.
Before stopping the machine it is necessary to:
• Shut-down the mortar pump
(e1)
by pressing
ON/OFF
button.
• Let the machine run at idle speed for a few minutes.
At this point turn off the machine
by pressing the starting button
ON/OFF (c1)
on the control
panel.
In case an
emergency stop
gets necessary press
the red on yellow background button
(34)
.
38
39
34
40
i1
e1
c1
Summary of Contents for PRO H CL
