Turbosol MINI AVANT Use And Maintenance Manual Download | Manualshive

Page: 8 / 49

background image

EN

MINI AVANT

IS11/11 - 561185

2 - GENERAL INFORMATION

Cap. 2 -

Pag. 3/3

THIS MANUAL IS PROPERTY OF

-

ANY TOTAL OR PARTIAL REPRODUCTION IS STRICTLY FORBIDDEN

2.6

GENERAL AND CONTACT INFORMATION

The MINI AVANT electric plastering machine and conveyor of common and special mortars can be supplied in different set-ups
and with different accessories, therefore it is not said that all components described in this manual are mounted on your
machine.

The Customer Service department of Turbosol Produzione S.p.A. will be glad to provide any information you may need.

Turbosol Produzione S.p.A.

Via Volta, 1
31030 Pero di Breda di Piave (TV) - ITALIA

Tel. +39 - 0422 - 90.2.51
Fax +39 - 0422 - 90.44.08
website: www.turbosol.it
e-mail: [email protected]

TURBOSOL MACHINES

They are the result of years of experience and constant research. The "know how" acquired in this way, along with great
attention to quality, constitutes the fundamental guarantee for the manufacturing of machines with long duration, great reliability
and reduced management costs.

MAINTENANCE AND CARE
Proper maintenance and care are essential for the machine to work as designed. It is therefore extremely important that users
respect the recommended maintenance intervals and carry out any maintenance required, both to keep the machine in perfect
running order and to preserve the validity of the warranty.

SAFETY
All service staff must be informed of the Safety Standards. The general Standards relative to safety and accident prevention
envisioned by local legislation must also be complied with.

OPERATOR TRAINING
The operator must receive specific training regarding the operations to be carried out.
Turbosol periodically carries out training courses, also on specific request of the customer.

TURBOSOL SERVICE
Please contact your TURBOSOL dealer for any information regarding machine malfunctions or requests for spare
parts.

Turbosol Produzione S.p.A. reserves the right to make any technical modification for machine improvement, even if not
contemplated in this manual. Some drawings and representations may be indicative.

«
...
6
7
8
9
10
...
»

Summary of Contents for MINI AVANT


















































Reviews:

No comments

Related manuals for MINI AVANT

Brand: Raymarine Pages: 464

Brand: 3M Pages: 8

Brand: ZOLL Pages: 3

Brand: Modulate Pages: 2

D-MAS HyperSat 2540

Brand: DanMedical Pages: 103

Brand: Dairyland Pages: 21

Brand: HALDER Pages: 2

Brand: Hakko Electronics Pages: 16

Brand: JBL Pages: 38

Brand: JBSYSTEMS Light Pages: 32

Brand: Raymarine Pages: 3

SmartPilot ST8002

Brand: Raymarine Pages: 48

Brand: Raymarine Pages: 38

hsb2 PLUS Series

Brand: Raymarine Pages: 248

Brand: Jackson Pages: 2

Optima XR200amx

Brand: GE Pages: 46

Brand: Life Fitness Pages: 45

VADA TWIN MOTOR MACERATOR

Brand: Reece Pages: 7

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands