EN
MINI AVANT
IS11/11 - 561185
5 - INSTALLATION
Cap. 5 -
Pag. 1/8
THIS MANUAL IS PROPERTY OF
-
ANY TOTAL OR PARTIAL REPRODUCTION IS STRICTLY FORBIDDEN
5.1
POSITIONING THE MACHINE
Place the machine in a horizontal position; the maximum gradient allowed is 5° both lengthwise and crosswise (FIG.06).
5°
5°
5°
FIG.07
The machine must be positioned in the point of the worksite that allows the pipes and hoses to their full extension.
Be sure to leave a passageway all around the machine (FIG.08) clear of any obstacles and with no holes or
hazardous projections.
140 cm
140 cm
120 cm
120 cm
64 cm
FIG.08 FIG.09
The hopper loading height is about 64 centimetres (FIG.09).
5.2 PIPING
Lay out the piping optimising lengths as much as possible (to reduce transport time and wear) and make sure the pipes are in
good condition.
The pipes must be connected to each other with the longest pieces (20 mt) connected to the machine and so on until the
shortest pieces are connected to the gun.
