Cleaning, servicing and maintenance
6-51
6.2.3
Replacing PU strip
The safety regulations from chapter 4.2 apply.
➔
Renew PU strip only when sweeper is attached to carrier vehicle and
raised.
➔
The dirt hopper must be empty and completely open.
•
Do not enter or work under the raised sweeper.
•
Secure sweeper and carrier vehicle against inadvertent starting,
rolling or lowering.
•
Always secure the opened dirt hopper by operating the shut-off
valve. Additional mechanical locking arrangement is necessary to
prevent closing of the hopper.
•
Be careful of the actual weight of the bumper bar and PU-strip.
•
Loosen the fastening nuts (3) and
bolts (4) along the whole length of
the PU-strip (1).
•
Remove the bumper bar (2) and
the old PU-strip (1).
4
•
Renew the PU-strip (1).
1
➔
For re-assembly carry out
these steps in reverse
sequence.
2
3
Fig. 6.9
6.2.4
Replacing fuse
The safety regulations from chapter 4.2 apply.
•
Unscrew the fuse holder (1).
•
Insert a new fuse.
•
Screw the fuse holder closed again
(1).
1
Fig. 6.10
Summary of Contents for PLUS 560
