Coupling and uncoupling the sweeper
4.3.3
Set / adjust side brush
4-33
•
The safety regulations from chapter 4.2 apply.
➔
Take the actual weight
of the side brush itself into
account when adjusting.
1
•
The cantilever arm (1) lies on the
pin (2) when the sweeper is 3-6 cm
above the ground.
•
Adjustment: Remove the cotter pin
(3), pull out the pin (2) and remove
some of the spacer washers (4). In
this way the side brush is
adjusted downwards.
2
3
4
Fig. 4.18
Adapt working width
•
Loosen bolt connection (5) and
adjust side brush at the lengthwise
slot.
•
Move the bolt connection (6)
from the stop.
The side brush moves further
inwards or outwards (7).
5
6
7
Fig. 4.19
Side brush - adjusting contact point
•
The side brush should sweep the
side edge in clockwise region from
12
o’clock to 3 o'clock (see arc (7)
•
Move clamping discs (8). Slope (9)
is adjusted.
•
Move clamping plates (10).
Angle of attack (11) is set.
•
Carry out function test.
8
10
7
11
9
Fig. 4.20
➔
Check all bolt connections for tight seating.
Summary of Contents for PLUS 560
