Cleaning, servicing and maintenance
6.2.2
Replacing disc brush for the side-brushes
6-50
Replacement work on the Sweeper PLUS 560 must only be carried out
after switching off the hydraulic drive and uncoupling the hydraulic
connections. Secure carrier vehicle against inadvertent starting or rolling.
•
Swing the side brush up (from
Pos. A to Pos. B) and click
lever (1) into place (2) (see
Chap. 4.3.1)
•
Remove three hexagon nuts (3).
➔
Be careful of the actual
weight of the disc brush.
3
1
2
Fig. 6.7
•
Remove the old disc brush (4).
•
Drill attachment -holes in the
new disc brush corresponding
to the flange (5).
•
Secure disc brush with
new locknuts.
•
Swing side brush into the
working position and adjust in
accordance with Chapter 4.3.2.
4
3
5
•
In the case of hydraulic
swinging side brush the disc
brush must be raised in the up
position. The replacement of the
disc brush is similar to that for
the mechanically swinging side
brush.
Fig. 6.8
Summary of Contents for PLUS 560
