Tuchel Big Instruction Manual Download Page 2

Page: 2 / 56

Table of contents

Foreword............................................................................................................................ 4

General information about this operating manual................................................... 5

A word about this operating manual...................................................................................................... 5

Declaration of conformity........................................................................................................................ 6

Safety........................................................................................................................... 8

General safety information ..................................................................................................................... 8

Intended use ............................................................................................................................................. 8

Safety instructions in the operating manual ......................................................................................... 9

Safety stickers on the accessory equipment...................................................................................... 10

Safety regulations .................................................................................................................................. 11

Safety devices ........................................................................................................................................ 11

Clothing................................................................................................................................................... 11

Modifications to the accessory equipment ......................................................................................... 11

Before leaving the host vehicle ............................................................................................................ 12

Climbing on and off ............................................................................................................................... 12

Protecting against injuries.................................................................................................................... 12

Operating the accessory equipment.................................................................................................... 13

Transporting ........................................................................................................................................... 13

Safety measures during maintenance ................................................................................................. 14

Before performing maintenance work ................................................................................................. 14

During the maintenance ........................................................................................................................ 14

Technical data........................................................................................................... 15

Dimensions............................................................................................................................................. 15

Work values ............................................................................................................................................ 15

Working hydraulics................................................................................................................................ 16

Attachment with mount ......................................................................................................................... 16

Additional equipment (option).............................................................................................................. 16

Description / overview.............................................................................................. 17

General view ........................................................................................................................................... 18

Accessories (optional)........................................................................................................................... 19

Side broom............................................................................................................................................... 19

Water spraying unit .................................................................................................................................. 19

Type plate ............................................................................................................................................... 20

Identification marking locations........................................................................................................... 21

Operation................................................................................................................... 22

Working with accessory equipment..................................................................................................... 22

Safety regulations when working with accessory equipment................................................................... 22

Placing into operation ........................................................................................................................... 23

Before placing into operation ................................................................................................................... 23

Checks before placing into operation....................................................................................................... 24

Installing the sweeper shovel attachment ................................................................................................ 25

Working with the sweeper shovel attachment.................................................................................... 26

Summary of Contents for Big

























































Search results

Summary of Contents for Big

Reviews:

Related manuals for Big

Brands by name

Popular brands

Tuchel Big, Instruction Manual

Search results

Summary of Contents for Big

Reviews:

Related manuals for Big

Brands by name

Popular brands