Tuchel Big, Instruction Manual

Page: 38 / 56

Operation
38
Pos: 58 /Tuchel/Bedienung/Wassersprüheinrichtung (Option) @ 1\mod_1199802272953_21.doc @ 10429
Water spraying unit (option)
Switching the water spraying unit pump on
000076
1
The water spraying unit is used to bind dust or dirt particles.
1. Where needed, switch the water spraying unit on and off at the
switch (1).
Filling the water tank
1. Open the tank cover (1).
2. Fill up the tank with water.
ATTENTION!
Damage to components of the water spraying unit
through the use of additives in the spray water.
•
Use water exclusively.
000071
1
Emptying the water tank
000072
1
The water tank must be emptied when the sweeper shovel
attachment is stored for a longer period of time, when specific
maintenance work is performed and when there is a risk of frost.
1. For the 100 l tank, operate the water spraying unit until the
tank is empty.
For the 200 l tank, open the drain bolt (1).
2. If there is a risk of frost, switch the water spraying unit on and
allow it to pump for 10 to 15 seconds until there is no residual
water left in the line. See
" Switching the water spraying unit
pump on ", page 38 .