Tuchel Big Instruction Manual Download Page 10 | Manualshive

Page: 10 / 56

background image

Safety

10

Pos: 12 /Tuchel/Sicherheit/Sicherheitsaufkleber am Anbaugerät @ 1\mod_1194950171671_21.doc @ 9544

Safety stickers on the accessory equipment

Information and symbols attached directly to the accessory
equipment such as safety stickers must be observed without fail.
They may not be removed and are to be kept in a completely
legible condition.
The following information and symbols are attached to the
accessory equipment:

Pos: 13 /Tuchel/Sicherheit/Sicherheitsaufkleber/Warnschild – BA lesen (vor Inbetriebnahme) @ 1\mod_1194950372000_21.doc @ 9558

Read and observe the operating manual and safety instructions
before placing into operation.

Pos: 14 /Tuchel/Sicherheit/Sicherheitsaufkleber/Warnschild – angehobene Last @ 1\mod_1194950548812_21.doc @ 9571

Do not stay in the area of a raised and unsecured load. Keep
back a sufficient distance.

Pos: 15 /Tuchel/Sicherheit/Sicherheitsaufkleber/Warnschild – Quetschgefahr im Klappbereich @ 1\mod_1194950960140_21.doc @ 9597

Do not reach into hazard areas where there is a danger of
crushing as long as the parts in these areas are still able to move.

Pos: 16 /Tuchel/Sicherheit/Sicherheitsaufkleber/Warnschild – fortgeschleuderter Schmutz @ 1\mod_1194951712812_21.doc @ 9610

There is a risk of dirt being flung forward by the rotating sweeper
cylinder. Keep back a sufficient distance.

Pos: 17 /Tuchel/Sicherheit/Sicherheitsaufkleber/Warnschild – Schnittgefahr durch drehende Teile @ 1\mod_1194950756843_21.doc @ 9584

Do not reach in to grasp rotating machine parts. Wait until the
machine parts have come to a standstill.

Pos: 18 /Tuchel/=============== @ 1\mod_1202294702901_0.doc @ 11563

«
...
8
9
10
11
12
...
»

Summary of Contents for Big

























































Reviews:

No comments

Related manuals for Big

Brand: Baileigh Industrial Pages: 40

Brand: Ace Pages: 17

Brand: ACE INSTRUMENTS Pages: 33

Brand: ACE INSTRUMENTS Pages: 2

Brand: ACE INSTRUMENTS Pages: 2

Brand: TapFlo Pages: 35

Brand: DANA Pages: 8

Brand: 2E Pages: 6

Brand: DB Industries Pages: 60

Brand: vc999 Pages: 55

Brand: Salsbury Industries Pages: 4

Brand: dbx Pages: 2

Brand: Eagle Group Pages: 8

Brand: Federal Signal Corporation Pages: 4

Brand: FASTERHOLT Pages: 96

9NP-B7524 Series

Brand: Nautilus Pages: 2

Be strong NS 700X

Brand: Nautilus Pages: 34

Brand: Nautilus Pages: 21

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands