Tuchel Big Instruction Manual Download Page 27 | Manualshive

Page: 27 / 56

background image

Operation

27

Adjusting the revolution speed

The speed of the sweeper cylinder is dependent on the power
output of the host vehicle. If the engine speed is increased and
thus the volume flow of the hydraulic oil, the speed of the sweeper
cylinder is also increased.

Sweeping and collection of sweepings

1. Carefully lower the sweeper shovel attachment to the ground

so that the underside of the blade (1) is standing parallel to the
working surface.

WARNING!

There is a risk of the sweepings being flung forward by
the rotating sweeper cylinder.

•

Persons standing nearby must maintain a safe

distance of at least 5 m.

000066

1

2. Allow the sweeper cylinder to turn.

3. Observe the correct direction of rotation of the sweeper

cylinder, see arrow.

4. Drive forwards or backwards to clean the working surface.

9

The sweepings are swept into and collected in the sweeper

shovel compartment.

000067

NOTE!

Depending on the intended use, the sweeper shovel
attachment can be operated in both driving directions.
You will usually achieve better results with backwards
operation.

DANGER!

When driving backwards, persons and obstacles may
not always be easy to see.

•

Pay attention that no one is standing in the way

behind the host vehicle.

•

Ensure that path of travel behind the vehicle is free.

•

Have a second person assist you if visibility

conditions require it.

«
...
25
26
27
28
29
...
»

Summary of Contents for Big

























































Reviews:

No comments

Related manuals for Big

Brand: DARAY Pages: 28

Brand: MacDon Pages: 88

Brand: Jiffy Pages: 15

Brand: Taylor Pages: 70

Brand: Raith Pages: 26

Brand: Kane Pages: 16

Brand: FENDT Pages: 31

LOUDEN 200 Series

Brand: ACCO Brands Pages: 144

Brand: B&K Pages: 16

Brand: B&G Pages: 2

Brand: EuroLite Pages: 28

Brand: Teac Pages: 44

Brand: Te Pari Pages: 6

Brand: NAMYSLO Pages: 13

Brand: Ultrasonic Pages: 33

Cutler-Hammer ATC-300

Brand: Eaton Pages: 32

Brand: Parker Pages: 24

Brand: Kaiweets Pages: 6

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands