Tuchel Big Instruction Manual Download Page 11 | Manualshive

Page: 11 / 56

background image

Safety

11

Pos: 19 /Tuchel/Sicherheit/Sicherheitsvorschriften @ 1\mod_1194951874234_21.doc @ 9623

Safety regulations

You may only operate or perform maintenance work on the
accessory equipment if you have been trained accordingly and
are authorised to do so.
Observe all regulations, measures and safety instructions when
operating or performing maintenance work on the accessory
equipment.
When working together with other persons, discuss and agree to
all the hand signals that you are planning to use amongst each
other and designate a coordinating person beforehand.

Pos: 20 /Tuchel/Sicherheit/Sicherheitseinrichtungen @ 1\mod_1194952025921_21.doc @ 9636

Safety devices

Ensure that all guards and covers are properly attached to the
accessory equipment.
Make sure that damaged guards and covers are repaired.
Under no circumstances may any safety installations be removed
such as e.g. the protective grating.

Pos: 21 /Tuchel/Sicherheit/Kleidung @ 1\mod_1194952723437_21.doc @ 9649

Clothing

You may not wear loose-fitting clothing, jewellery or wear your
hair open. These items could get caught in control elements or in
moving or rotating parts and cause severe injuries.
Change clothing that is soiled with highly inflammable substances
immediately.
Always wear the operationally required protective equipment e.g.
hearing protection, protective glasses, safety shoes, dust mask or
gloves when operating or performing maintenance work on the
machine.
Make sure that no unauthorised person(s) are remaining in the
hazard area.

Pos: 22 /Tuchel/Sicherheit/Änderungen am Anbaugerät @ 1\mod_1194953101234_21.doc @ 9662

Modifications to the accessory equipment

Tuchel Maschinenbau GmbH assumes no liability for
modifications that are made without the express permission of the
manufacturer.
Tuchel Maschinenbau GmbH assumes no responsibility for
injuries or damages caused by unapproved modifications.

Pos: 23 /Tuchel/=============== @ 1\mod_1202294702901_0.doc @ 11563

«
...
9
10
11
12
13
...
»

Summary of Contents for Big

























































Reviews:

No comments

Related manuals for Big

Brand: GBC Pages: 8

Brand: KAPSCH Pages: 57

Brand: MacDon Pages: 89

Brand: Yates Pages: 2

Brand: JAC Pages: 100

Brand: Kapriol Pages: 32

Brand: Raven Pages: 27

Brand: Raven Pages: 79

Brand: Raven Pages: 88

Brand: KaVo Pages: 13

Brand: vc999 Pages: 52

Brand: Campbell Pages: 2

Brand: Faderfox Pages: 8

Brand: Eagle Eye Pages: 21

Brand: Labomed Pages: 67

Brand: Taurus Pages: 24

Brand: Kamikaze Pages: 112

Brand: KAM Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands