Setting up Parameters via the Keypad
How Particulate Factors are Adjusted and Calculated
EVM Series User Manual
29
4.
Select the
Profile field
by pressing
▲
/
▼
Arrows
and press the
Edit
soft key.
Profile
Select this field and then press
Edit
soft key to
modify the Profile screen.
Edit soft key
Visible when profile menu item is highlighted
Figure 3-10: Edit profiles for dust calibration
5.
Press the
Edit
soft key and the
Edit Profile
screen will open.
Profile name
Optional: customize the profile name
Factor
Figure 3-11: Entering a profile for particulate calibration
6.
(
Optional
, see step seven if not changing profile name.) To change the name of the profile, ensure
the profile field is selected and press the
Enter
. Press
▲
/
▼
Arrows
to change the characters.
To move to the next position, press
◄
/
►
Arrows
then press
Enter
.
7.
Press
▼
Arrow
to select the
Factor
and press
Enter
to move to the 2
nd
column. Press
▲
/
▼
Arrows
to change the numeric value. Press the left/right arrow key to move to the next position.
Continue this process until the appropriate number is selected and press
Enter
to confirm or
Esc
key to cancel changes.
8.
Press the
On/Off/Esc
to return to the particulate screen.
9.
To apply a new profile, select the profile field and move to the second column (by pressing
Enter
.) Then continuously press
▲
/
▼
Arrows
until the appropriate profile/correction factor is
selected. Press
Enter
to return to the first column.
10.
Press
On/Off/Esc
twice to return to the start screen.
