Setting up the Environmental Monitor
Setting up Parameters via the Keypad
EVM Series User Manual
24
Set logging intervals, logging attributes, and view run time
1. From the start menu, press
▲
/
▼
Arrows to select Setup and press
Enter
. Select
Logging
and press
Enter
.
2. To change Logging Interval or Averaging follow below:
Press
▲
/
▼
Arrows
to select Logging interval or Averaging.
Press
Enter
to move to the changeable field, and then press
▲
/
▼
Arrows.
Press
Enter
to return to the 1
st
column and save your settings.
3. To enable/disable logging, follow below:
Select a measurement by pressing
▲
/
▼
Arrows
.
Once selected, press
Enter
(this will move your cursor to the “On/Off” field.)
Press
▲
/
▼
Arrows
to toggle and select
On
or
Off
.
Press
Enter
again to return to the measurement.
Repeat step 3 until all logging parameters are enabled/disabled.
Logging time/averaging time
Logging attributes/measurements
Run Time
When selected, the estimated run time screen
displays the total remaining time.
Figure 3-5: Logging screen
